Mounting
Surface mounts to ceilings via shock absorbing mounting brackets.
Housing
18 gauge cold rolled steel die-formed to shape, seam
welded and ground smooth. 304 Stainless steel available.
Door
One piece, die-formed 16 gauge cold rolled steel with ‘J-Hook’
hinge system. Stainless steel available.
Lens
Optic Plus lens (standard) completely hides diode image while
providing greater than 90% light transmission.
Finish
Polyester powder-coated after phosphate pre-treatment for
superior adhesion and corrosion resistance. Brushed
stainless steel available.
Hardware
Stainless steel Philips head fasteners (standard).
Driver
0-10Vdc, >0.9 PF , <20% THD
Factory programmable, Operating temp -40°C Min. to 50°C Max.
Wiring
Wire entry is provided by a 0.50 in. NPT hazardous location conduit hub.
Certifications
UL 844. IP 65 rated.
Certified for:
Class I Division 2, location groups A, B, C, and D,
Class II Division 2, location groups F and G,
Class III.
FME Lighting | 18585 Coastal Highway | Unit 10 PMB 104 | Rehoboth Beach Delaware, 19971
877-234-8460 | Fax: 302-209-6538 | info@fmelighting.com